700 series deck
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197516
Printed Date: 23 Nov 2024 at 6:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 700 series deck
Posted By: DaveWisc.
Subject: 700 series deck
Date Posted: 04 Oct 2023 at 8:00am
| Are the bearings on the deck special or can I get new ones at like a parts store |
Replies:
Posted By: Leadoff
Date Posted: 04 Oct 2023 at 8:20pm
|
DaveWisc I purchased new bearings from the local Simplicity Dealer last year when rebuilding my 48" 700 Series Deck. They work well, and I don't believe they were anything special. The Dealer had them in stock. Water/wet grass and dust/dirt is probably the number one operating concern for these bearings. Good luck ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |
Posted By: DaveWisc.
Date Posted: 04 Oct 2023 at 8:59pm
| I got more problem with the deck I need the center hub on the mower deck. Hope someone has a good one it is a Simplicity deck which is different than Allis Chalmers |
Posted By: Mikez
Date Posted: 04 Oct 2023 at 9:32pm
|
Does this deck have the heavier cast center pulley. Does it have one or two bolts holding blade on.
|
Posted By: DaveWisc.
Date Posted: 05 Oct 2023 at 6:41am
| It has two bolts that hold blade on . The top has a big self locking nut .It is a Simplicity deck I gave two Allis decks but are different and will not work |
Posted By: Mikez
Date Posted: 05 Oct 2023 at 6:56am
 Look like this. This is bottom side. We have some of those decks too. I hope you don’t need the arbor shaft for center. If you’re needing the top hub that pulley bolts to. We have had problems with those too. And can help you. |
Posted By: DaveWisc.
Date Posted: 05 Oct 2023 at 7:43am
| That is what i have and the belt pully bolts on that piece.My shaft is bad too but can get that fixed. How much for that piece i live in Southwestern Wisc. Thanks Dave |