Installing decals on my 1952 CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197489
Printed Date: 12 Nov 2024 at 7:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Installing decals on my 1952 CA
Posted By: 52AllisCA
Subject: Installing decals on my 1952 CA
Date Posted: 02 Oct 2023 at 12:03pm
|
Hello everyone, i recently purchased a vinyl decal kit for my 52' CA and was curious about decal locations as far as how it came from the factory. Didn't see to much in the manual, so figured id best turn here to the forum. The " Allis chalmers" & "CA" decals i have applied already. Making a hinge with a line of tape method is how i went about applying them, and that worked out great. I've seen the pump adjustment chart applied to the battery box, the side of inner right fender, and next to the hydraulic control lever, just not sure which spot is correct from factory. Any help would be greatly appreciated. thanks again everyone, this forum/ community has been a tremendous help from day one. S.R
|
Replies:
Posted By: 55allis
Date Posted: 02 Oct 2023 at 12:22pm
|
I think the traction booster (or pump adjustment chart) decal goes on the battery box… I don’t have one personally but my brother does… ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD45 |
Posted By: 52AllisCA
Date Posted: 02 Oct 2023 at 12:27pm
| Thanks 55, I've definitely seen the majority of the pump chart decals on the battery box, and was kinda leaning that way as far as placement goes. Will see if many chime in here on the whereabouts to place that decal. Thanks for your feedback. |
Posted By: PaulB
Date Posted: 02 Oct 2023 at 12:28pm
|
All of the original CA tractors I have seen the hydraulic pump/ traction booster decal was on the right fender near the lift/lower lever. The WD-WD45 tractors had them on the right side of the battery box. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: 52AllisCA
Date Posted: 02 Oct 2023 at 1:15pm
|
PaulB, Thanks man for your feedback on this decal location. I've seen a bunch on the battery box but just wasn't sold yet on weather or not they came from the factory like that. thanks Paul. S.R
|
Posted By: DSeries4
Date Posted: 02 Oct 2023 at 3:09pm
|
100% Original tractor here. Hydraulic decal is on the inside of the left fender ....   ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: 52AllisCA
Date Posted: 02 Oct 2023 at 3:48pm
| Dseries4, very much appreciated, i thank you again for the pictures! exaclty what i was after. thanks |
Posted By: 55allis
Date Posted: 02 Oct 2023 at 5:01pm
|
That makes sense because the lever/ adjusting screw is back there. Thanks for correcting me… My brothers is on the battery box but it’s not original… ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD45 |
Posted By: 1955CA
Date Posted: 02 Oct 2023 at 6:14pm
That's where mine is on my 1955 CA
|
DSeries4 wrote: