deutz allis 1920
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197459
Printed Date: 26 May 2024 at 10:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: deutz allis 1920
Posted By: eslickl
Subject: deutz allis 1920
Date Posted: 30 Sep 2023 at 2:08pm
| I have a 1920 that the hydro lift suddenly will not go down, lift it up and when trying to push lever to let it down lever will not move, anyone with any idea? |
Replies:
Posted By: DougG
Date Posted: 01 Oct 2023 at 3:05am
| Make sure the rear of deck mechanizm is not binding up ; the wheels in back |
Posted By: Gary
Date Posted: 01 Oct 2023 at 4:37am
|
Does the Lever spring back to Neutral when you pull it back to raise the deck? |
Posted By: Gary
Date Posted: 01 Oct 2023 at 4:38am
|
Does the Lever spring back to Neutral when you pull it back to raise the deck? G |
Posted By: eslickl
Date Posted: 01 Oct 2023 at 6:46pm
| when U raise it , it seems to go to neutral, but then I can not get it to push back to lower, if it is only raised part way and then stop it does stop there. but not able to push arm to lower. |
Posted By: eslickl
Date Posted: 01 Oct 2023 at 6:49pm
| when I raise it only part way or all the way, it stops when I release the lever but can not push it to lower. |
Posted By: Jason (IN)
Date Posted: 01 Oct 2023 at 6:56pm
| I would take that side panel off right next to the lift lever. Should be only 3 screws. Or you can shine a light in where the lever goes through. Need to make sure the spool valve and linkage isn’t binding. Then if all looks well make sure the rock shaft under the tractor has free movement. |
Posted By: eslickl
Date Posted: 26 Oct 2023 at 5:58pm
| well I sold it cheap, that makes it not my prob. anymore, told the new owner of the concern, he did not seem concerned |
Posted By: eslickl
Date Posted: 26 Oct 2023 at 5:59pm
Thanks everyone for the help 
|