Farm Equipment - acessing 8070 hyd pump for loader

Print Page | Close Window

acessing 8070 hyd pump for loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197339
Printed Date: 25 Sep 2024 at 7:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: acessing 8070 hyd pump for loader

Posted By: johnny s brooks
Subject: acessing 8070 hyd pump for loader
Date Posted: 23 Sep 2023 at 6:21pm

I want to install my Westendorf loader from a 7080 to my 8070. We tapped the end plate on the valve body of the 7080 for the three lines (power up, power down and pilot {stand by}). That option is not available on the 8070 valve body. Can I tap the 8070 hydraulic pump directly and where? The 8070 is a power director tractor and FWA. Thanks for any help you all can provide.

Replies:

Posted By: 8070nc
Date Posted: 23 Sep 2023 at 8:45pm

As long as you have a load sensing closed center valve it looks to me like you could tap it anywhere between the pump and valve stack

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor