Help 8050 hard steering
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197331
Printed Date: 12 Nov 2024 at 8:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help 8050 hard steering
Posted By: victoryallis
Subject: Help 8050 hard steering
Date Posted: 23 Sep 2023 at 7:33am
I’m had this tractor 3-4 years it’s been harder to steer the most of the time I’ve owned it. Been bad enough twice were I’ve had to use brakes to steer. First time old school Allis mechanic pulled the priority valve and cleaned it a got me going. Second time I did it. It now is currently steerable but takes EFFORT. It had some other issues to so it landed at the Agco dealership(was Allis back in the day). The tech that got assigned to it admits he’s new to working on tractors but sounds fairly mechanically inclined. He agrees it steers hard. He’s checked the priority valve, checked flows and pressures. He has changed filters it’s no better. He admits he’s at a loss where to look next. Flows and pressures are good. I told him I’d do some research over the weekend and get back with him.
Ideas?
Something in the steering column? He has the front end up on blocks and still stubborn.
-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760
|
Replies:
Posted By: cowkicker
Date Posted: 23 Sep 2023 at 8:04am
|
If it is a FWA, the axle u-joints could be dry and trying to seize. If you have it jacked up, unhook one end of the steering cylinder and use a pry bar between the tire and spindle and try to turn the wheels. New u-joints made my 8070 steer like new.
|
Posted By: Tenn allis
Date Posted: 23 Sep 2023 at 8:05am
Take the steering cylinder loose on one end and see if you have the same results
That will tell ya for sure if you have a hydraulic issue or a binding issue in the front end
|
Posted By: Lynn Marshall
Date Posted: 23 Sep 2023 at 8:06am
Posted By: MACK
Date Posted: 23 Sep 2023 at 8:49pm
|
Make sure the office didn't get lost during one of the checks. MACK
|
|