Farm Equipment - 6060 neutral safety switch

Print Page | Close Window

6060 neutral safety switch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197216
Printed Date: 25 Sep 2024 at 7:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6060 neutral safety switch

Posted By: Dwayne TX
Subject: 6060 neutral safety switch
Date Posted: 16 Sep 2023 at 11:34am

Where is the clutch safety switch located? Think it's out & I'm not finding it.

Replies:

Posted By: AC720Man
Date Posted: 16 Sep 2023 at 11:47am

Aggravating to get to but remove the bolts holding the large access cover on under the steering wheel. Take a flashlight and look there at the clutch pedal. A lot of times the switch comes loose due to vibration making you think it went bad. We have had that happen twice. Second time I added blue lock tight and it’s been fine since.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: Lynn Marshall
Date Posted: 16 Sep 2023 at 4:29pm

PTO safety switches on that series also need to be checked if it won't crank over.

Posted By: dchilton
Date Posted: 21 Sep 2023 at 10:48pm

On my 6080 it was under floor board on right side in front rear tire. If I remember right.