D19 Project
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=197187
Printed Date: 25 Sep 2024 at 9:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 Project
Posted By: Stu ECWI
Subject: D19 Project
Date Posted: 14 Sep 2023 at 5:09pm
I'm hoping somebody can save some run-around. Thought it was a "real big" issue when I couldn't steer a project D19, with the front wheels off the ground, they would turn with a long bar against the spindle. Last week went to it and removed the front end. Amazing, the steering seemed to work flawlessly when turning the stub shaft, like there was no problem. After a while I grabbed the steering wheel to discover the universal joint closest to the bell housing was rusted tight!!  So, does anybody know a part number or even size of cross I'll need to repair the joint??? I haven't started digging yet, and hoped somebody could save some time!! Thanks, Stu ------------- I've got more time than money, and lately not alot of time! |
Replies:
Posted By: AC720Man
Date Posted: 14 Sep 2023 at 10:13pm
|
I got one from DJS for my D17, fits D19 also. I choose to replace just the shaft cross bearing. $17.75. Comes with a grease zirk. Easy to install. Otherwise the entire universal joint is $130. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: MACK
Date Posted: 15 Sep 2023 at 8:26pm
| Some of the after markets are too long and won't work. MACK |
Posted By: Model 70
Date Posted: 16 Sep 2023 at 1:24pm
| Weasler 200-0600 |
Posted By: AC720Man
Date Posted: 16 Sep 2023 at 8:30pm
|
And they are a ***** to get off! That’s why I did just the cross bearing which is all that needed replacing anyway. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Stu ECWI
Date Posted: 16 Sep 2023 at 9:56pm
|
Thanks guys I ordered the cross from DJS, supposed to arrive Monday. Weasler is about 15 miles South of me, that would have been great too!! Thanks!! ------------- I've got more time than money, and lately not alot of time! |
Posted By: AC720Man
Date Posted: 16 Sep 2023 at 11:19pm
|
Take your time when replacing it. After removing the old one, be careful as you place caps with bearings in them. They are greased in place and must be lined up correctly before you press the cross into them. It’s a little more difficult to do while the universal is still on the tractor but that’s how I did mine. I put a small socket facing outward in from the opposite side and used a C clamp to draw it together. Worked great. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |