Farm Equipment - CA carburetor and choke springs

Print Page | Close Window

CA carburetor and choke springs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196739
Printed Date: 12 Nov 2024 at 10:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA carburetor and choke springs

Posted By: JimWenigOH
Subject: CA carburetor and choke springs
Date Posted: 19 Aug 2023 at 7:01pm

I have a CA that didn't have a spring on both the choke control and the carburetor link from the governor. I have the springs but need some help with where both ends connect. I know where the choke spring connects to the carb, but need to know where the other end connects. I know where the spring connects to the hole in the carb link, but need to know where the other end connects. I looked through my Operators, Parts and Service Manuals but didn't see this information. Thanks.

Replies:

Posted By: Kip-Utah
Date Posted: 20 Aug 2023 at 12:51pm

I don’t know on the choke, but the big end of the anti-surge spring hooks on a manifold stud.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: DSeries4
Date Posted: 20 Aug 2023 at 6:00pm

The anti surge spring goes up to one of the manifold studs closer to the front of the tractor. I thought I had a picture, but I was wrong...

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080