Farm Equipment - gleaner n7 overfeed auger drive

Print Page | Close Window

gleaner n7 overfeed auger drive

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196712
Printed Date: 12 Nov 2024 at 10:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: gleaner n7 overfeed auger drive

Posted By: HudCo
Subject: gleaner n7 overfeed auger drive
Date Posted: 18 Aug 2023 at 11:46am

need to find the spring for the idler tension for those two belts

Replies:

Posted By: DrAllis
Date Posted: 18 Aug 2023 at 12:25pm

Same as an N-6/R6 N-5/R-5

Posted By: HudCo
Date Posted: 18 Aug 2023 at 12:28pm

the spring is 12 3/4 end to end coil lenght is 9 1/2 od of the coils 1 5/8 ithink it may be part 71319186 found on the accelerator rolls picture

Posted By: HudCo
Date Posted: 18 Aug 2023 at 12:32pm

dr. you must have replied when i was typing my customer had broke those two belts and had some new ones ordered but the agco dealer could not find the spring or a picture of it and i have not been back out to their machine to see for myself

Posted By: HudCo
Date Posted: 18 Aug 2023 at 4:43pm

discription fron agco says that part number 71319186 is 13 1/2 long