Pulling Forum - distributer d17 series 1

Print Page | Close Window

distributer d17 series 1

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196601
Printed Date: 19 May 2024 at 8:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: distributer d17 series 1

Posted By: HudCo
Subject: distributer d17 series 1
Date Posted: 10 Aug 2023 at 10:34am

will i be able to use the govenor and the distributer and the lube system in the wd block i am going to go get a tractor with a rod hanging out the pan on saturday hopefully the head will be good, (rebiuldable) for the puller engine

Replies:

Posted By: DrAllis
Date Posted: 11 Aug 2023 at 8:15pm

It will all fit, but be concerned about gear lash being too tight or too loose. That is why there is an alignment pin drilled into the block mounting surface.

Posted By: HudCo
Date Posted: 12 Aug 2023 at 10:14pm

got it home tonight looks like i will still need to find a distributer drive this has the steering pump in between iwont be useing thaton the 37 wc