82S mower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196515
Printed Date: 13 Aug 2025 at 8:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 82S mower
Posted By: Wolverine
Subject: 82S mower
Date Posted: 05 Aug 2023 at 9:37pm
| Buying a 82S mower that is on a D14 I am putting it on a D17 is it the same mount? |
Replies:
Posted By: AC720Man
Date Posted: 05 Aug 2023 at 9:46pm
|
Yes it uses the same mounts. Only thing you will need is a longer brace that goes from the rear pto drive support to the final drive. Easily made at a good machine shop. I had to have one made for my D17, as the one for the WD is too short. Excellent mower in so many ways, best design from AC in my opinion. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 05 Aug 2023 at 9:48pm
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Wolverine
Date Posted: 06 Aug 2023 at 9:32am
| Thanks for the info haven't picked it up yet maybe they have the other support. |
Posted By: AC720Man
Date Posted: 06 Aug 2023 at 12:38pm
|
That would be great if they have it. But it is an easy piece to replicate. I just placed the bracket on the drive support and took some measurements. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 06 Aug 2023 at 12:49pm
|
Since it is coming off a D14 you will not use the frame spacer on your D17. It is required for the D14 due to having a narrower side frame width. Just use the anchor bar. The operating instruction/setting-up directions &parts illustration book is excellent. Hope the mower comes with it. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 06 Aug 2023 at 12:51pm
 ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Wolverine
Date Posted: 07 Aug 2023 at 5:26am
|
I have a book ordered for it. |