Hydraulic hose placement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196442
Printed Date: 23 Nov 2024 at 3:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hydraulic hose placement
Posted By: Jhilton69
Subject: Hydraulic hose placement
Date Posted: 01 Aug 2023 at 9:40pm
| I blew a hydraulic hose on my AC 1962 HD6G last week and somehow got 2 of them backwards. Can someone help me get them the right way. It's the left side of the loader(driverside). There the ones that are located on the bottom back under the seat. Pics and which ones go where would help a lot. Thank ya |
Replies:
Posted By: doctorcorey
Date Posted: 01 Aug 2023 at 10:41pm
------------- Semper Fi USMC 1958 HD6G, 1959 MF 203 loader, 1960 Case 420B Backhoe, MF 65 Tractor/Loader Diesel |
Jhilton69 wrote:Posted By: Jhilton69
Date Posted: 01 Aug 2023 at 11:03pm
| I reconnected them back under the seat where it has 2 stacked on top each other |
Posted By: doctorcorey
Date Posted: 01 Aug 2023 at 11:53pm
|
I can't look at mine until tomorrow. There are tw0 different setups, a break at about serial number 11000, and the diagrams in the parts manual are difficult to visualize, with all the pipes stacked and running so close together. ------------- Semper Fi USMC 1958 HD6G, 1959 MF 203 loader, 1960 Case 420B Backhoe, MF 65 Tractor/Loader Diesel |
Posted By: Codger
Date Posted: 02 Aug 2023 at 5:23am
|
Not knowing serial number of tractor limits accuracy but here is a diagram of an HD6G which may help:  ------------- That's All Folks! |
Posted By: doctorcorey
Date Posted: 02 Aug 2023 at 7:51am
|
The hydraulic fluid tank diagram shows these ports pretty well, but I can't get pictures to load here. Looking from the outside, the upper right of the 4 ports is the retract tube of the left dump cylinder, the lower right port is the dump port for the left dump cyl. Upper left port is for the boom cylinder raise, and the lower left port is for the boom cyl lower (retract). ------------- Semper Fi USMC 1958 HD6G, 1959 MF 203 loader, 1960 Case 420B Backhoe, MF 65 Tractor/Loader Diesel |
Posted By: Jhilton69
Date Posted: 02 Aug 2023 at 4:20pm
| Thank you this gives me a good idea where to start. Glad you could follow the lines I tried several times and got lost when they hit the connection in the middle. |
Posted By: Jhilton69
Date Posted: 02 Aug 2023 at 4:22pm
| It's a 1962 model the places it says the serial number is it worn off |
Posted By: Jhilton69
Date Posted: 02 Aug 2023 at 6:01pm
  These are the 2 plates that's supposed to have the serial numbers I see 1 of the numbers looks like it's on both plates. Is this the serial number |
Posted By: doctorcorey
Date Posted: 02 Aug 2023 at 8:42pm
------------- Semper Fi USMC 1958 HD6G, 1959 MF 203 loader, 1960 Case 420B Backhoe, MF 65 Tractor/Loader Diesel |
Posted By: Jhilton69
Date Posted: 02 Aug 2023 at 11:57pm
| Thank ya |