Construction and other equipment

Print Page | Close Window

h3 oil filter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=196146
Printed Date: 23 Nov 2024 at 3:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: h3 oil filter

Posted By: lost in h3
Subject: h3 oil filter
Date Posted: 13 Jul 2023 at 11:02pm

I have just finished restoring a 1962-63 H3. I cannot find an oil filter to fit my filter mount. They are all to big where they screw in. Does anyone have any suggestions.

Thank tou

Replies:

Posted By: Tracy Martin TN
Date Posted: 13 Jul 2023 at 11:03pm

Does it not take a Fram PH8a filter?

-------------
No greater gift than healthy grandkids!

Posted By: lost in h3
Date Posted: 13 Jul 2023 at 11:06pm

I do not know but thanks for the number. I will try and let you know.

Posted By: lost in h3
Date Posted: 14 Jul 2023 at 5:51pm

Fram filter you mentioned is the correct filter. Someone had changed mounts and i ended up with a NAPA GOLD 1051. Thank you

Posted By: Jim.ME
Date Posted: 15 Jul 2023 at 7:54pm

Wix 51515 (PH8A cross) is a shown as a full flow (7-9 gallon per minute flow) filter. The NAPA 1051 (Wix 51051) is shown as a 1 gallon per minute flow. You may want to look into getting the correct base and filter.