Print Page | Close Window

unstyled wc gearshift head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195570
Printed Date: 22 Aug 2025 at 7:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: unstyled wc gearshift head
Posted By: HudCo
Subject: unstyled wc gearshift head
Date Posted: 06 Jun 2023 at 9:26pm
what is the best way to get the horizantal pins in betwween the rails without removing the reverse rail ?   also what is the purpose of the the revrese lock out lever besides being a gadjet



Replies:
Posted By: HudCo
Date Posted: 07 Jun 2023 at 9:44am
got it done .  but i would still like to know why the reverse lock out lever its not a dragster


Posted By: DrAllis
Date Posted: 07 Jun 2023 at 10:57am
Apparently you've never made the shift from rolling along in 3rd and trying to go to 4th and hitting reverse. That's WHY it's on there.


Posted By: HudCo
Date Posted: 07 Jun 2023 at 10:29pm
no not on that on that 4ft long crooked stick  i sure cant wait to find out,  but all the parts for the reverse lock out from that little pivot down to the end were rusted off  suprizing the trans has minimal rust and should be ok  , it only has to do full pulls .   if ican find the parts i would like to replace them



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net