Garden Tractors - Allis Chalmers 912 lawnmower

Allis Chalmers 912 lawnmower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195131
Printed Date: 26 Nov 2024 at 10:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers 912 lawnmower

Posted By: hunter321
Subject: Allis Chalmers 912 lawnmower
Date Posted: 13 May 2023 at 7:29pm

I am fixing a mower for my uncle and need to know everything that could be wrong with it
He said engine problems

Replies:

Posted By: AC720Man
Date Posted: 13 May 2023 at 7:44pm

Until you start diagnosing what is wrong not sure we can be of help. A lot of things can cause engine issues, once you get it make sure it has fire to the spark plug first. And go from there.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: Gary
Date Posted: 14 May 2023 at 4:44am

Start with the basics.

A Gas Engine needs 3 things to run: Fuel - Air - Spark

Like 720 says, make sure it has spark. Then move on.

G

https://www.tractordata.com/lawn-tractors/000/1/5/154-allis-chalmers-912.html" rel="nofollow - https://www.tractordata.com/lawn-tractors/000/1/5/154-allis-chalmers-912.html

.....................................................................

This gentleman Zippo Varga is very knowledgeable about Allis / Simplicity Tractors

https://www.youtube.com/results?search_query=allis+912+engine

Posted By: hunter321
Date Posted: 14 May 2023 at 5:29pm

I need to pull the engine
How do I do that

Posted By: Gary
Date Posted: 14 May 2023 at 6:28pm

For the past year you have been on the Forum requesting help with a dismantled Engine in an Allis D-12.

Now your starting another project regarding a Allis Model 912 Engine.

and you ask the simplest of questions !

How do I remove the engine ?

How the hill do you think you would remove the Engine ?

Unbolt the appropriate bolt, nuts, brackets, wiring, cables etc that are attaching the Engine to the Tractor and then lift it out.

What am I missing here ?

G

Posted By: Leadoff
Date Posted: 14 May 2023 at 7:27pm

hunter321

There are many excellent YouTube videos on how to do whatever project on repairing/tuning Garden Tractors. I have found Zippo Varga to be one of the best, and he seems to specialize in Allis Chalmers and Simplicity(identical to Allis Chalmers - same ownership/manufacturer). He explains lots of details, and speaks at a level most owners can understand

Here is a link to one of his recent vids. The second link is his YouTube video library

https://www.youtube.com/watch?v=W4qzjCVe7Rw" rel="nofollow - Barn Find Simplicity 700. Will it Run? - YouTube

https://www.youtube.com/@ZippoVarga/videos" rel="nofollow - Zippo Varga Small Engine Medic - YouTube

Good luck

PS he has several videos showing in great detail how to remove trhe engine

-------------
1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow

Posted By: hunter321
Date Posted: 15 May 2023 at 1:43pm

I got the engine pulled and the piston disconnected at the bottom but it won't pound out.
Also the flywheel seems to be seized.
So far it needs gaskets possibly piston rings

Posted By: hunter321
Date Posted: 19 May 2023 at 9:49am

I looked up the mower on tractor data and it said it has a Kohler k301s but I can only find the k301

Posted By: Gary
Date Posted: 19 May 2023 at 1:00pm

I believe the S means it has a Factory Starter.

G

Posted By: hunter321
Date Posted: 19 May 2023 at 1:18pm

Ok
So I can find gaskets for the 301

Posted By: hunter321
Date Posted: 10 Jun 2023 at 4:39pm

Ive looked all over for the correct way to wire the coil and can't find it
How do I wire it

Posted By: hunter321
Date Posted: 12 Jun 2023 at 10:21am

I have power to the points and the positive and negative points on the coil but no spark
Any help Is greatly appreciated

Posted By: HudCo
Date Posted: 12 Jun 2023 at 10:08pm

keyed battery power to the coil from the coil to points points must open and close and the contacts must be smooth and clean and gapped and condensor needs to be good . most all of the k 301 stuff fits

Posted By: hunter321
Date Posted: 24 Jun 2023 at 9:14am

I am looking for a cheap head for the k301 any suggestions on where to get one

Posted By: hunter321
Date Posted: 10 Jul 2023 at 8:18am

The mower suddenly lost spark

Posted By: hunter321
Date Posted: 17 Jul 2023 at 12:30pm

Does anyone have a wiring diagram for the mower
I am not Shure what I am looking for