AC Wagon Decal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194689
Printed Date: 24 Aug 2025 at 7:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC Wagon Decal
Posted By: WF owner
Subject: AC Wagon Decal
Date Posted: 18 Apr 2023 at 11:19am
|
I have an AC wagon that I use for hayrides. When I got it, the paint was pretty tough, so I used a needle scaler, wire wheel and sander, then neutralized the rust on rusty spots, primed and painted it. What I didn't do is take a picture of the decal placement (I think there was only the one decal on the back), nor measure the size of the decal. Does anyone have a picture of the decal placement and the size? Also if anyone knows a good source to buy a decal, I would appreciate it. I would like it to look original, if possible.
|
Replies:
Posted By: AC7060IL
Date Posted: 18 Apr 2023 at 12:06pm
|
Which running gear do you have? Whats it's ID tag list for Catalog number, serial number?
|
Posted By: WF owner
Date Posted: 18 Apr 2023 at 7:16pm
| I am pretty sure it is a 700, but I'm not sure if there is even a tag on it. |
Posted By: AC7060IL
Date Posted: 19 Apr 2023 at 6:59am
|
Mark, here’s an older AC forum thread that contains pics of an AC 700 ID tag, rear decal, & stenciled 700 on right rear hound. https://www.allischalmers.com/forum/allis-running-gear_topic137847.html" rel="nofollow - https://www.allischalmers.com/forum/allis-running-gear_topic137847.html |
Posted By: WF owner
Date Posted: 19 Apr 2023 at 7:52am
| Thank you! Any idea where I might find the decal? |
Posted By: AC7060IL
Date Posted: 19 Apr 2023 at 9:40am
|
I’d try your local print shop? Take a picture of rear decal from the link I provided & measurements to print shop. They can scan picture, edit it, & print decal. I took measurements of my 700’s rear decal & sharing them here. Rear AC 700 decal measurements; 22 5/16” long, Letters 2 5/16” tall, 7/16” black thickness, 3/32” white borders, 1/8” space between letters at widest points. A is 3/4”top,2”base, L is 11/16”top,1 3/16”base, I is 11/16”top&base(straight), S is 1 5/16” wide, 7/16” space dash is 5/8”tall, 7/8”wide, 7/16” space, “Printed in USA” is 3/32” below, C is 1 3:8” wide, H is 1 11/16” wide, M is 2” wide, E is 1 5:16” wide, R is 1 7/16” wide, In addition, there is a decal on mid section of reach, titled “Important”. I’ll try to get a picture of it later. Important decal is; 2 3/26” tall & 3 1/8” wide, IMPORTANT is 5/16” tall, Rest of words are 3/16” tall, |
Posted By: WF owner
Date Posted: 19 Apr 2023 at 11:57am
|
Thank you!!!!!! My granddaughter is very good with her Cricut. I'm thinking she might be able to make it for me.
|
Posted By: DSeries4
Date Posted: 19 Apr 2023 at 4:36pm
Here is my 800 running gear...   ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
WF owner wrote:Posted By: AC7060IL
Date Posted: 19 Apr 2023 at 4:46pm
|
Posted By: AC7060IL
Date Posted: 19 Apr 2023 at 4:56pm
|
Dseries4, nice photos of your AC 800 gear. It has the more modern rear decal from 1965 & up. WF’s AC 700 has an older pre 1965 rear decal & it has no triangle hound decal like your 800. The 700 has no AC rear hound decals just stenciled “700”. Hounds are the 2 channel braces that diagonally connect the rear axle beam (rear hounds) or front beam axle (front hounds) to their center reach (pipe). |
Posted By: WF owner
Date Posted: 19 Apr 2023 at 7:08pm
Now that I look at Myron's, I'm not so sure....
|
Posted By: AC7060IL
Date Posted: 20 Apr 2023 at 7:24am
|
Posted By: WF owner
Date Posted: 20 Apr 2023 at 7:56pm
|
I went down and pulled the wagon away from the wall today. The guy that did the painting several years ago (me) never peeled the painter's tape off the tag and it doesn't come off easy after several years! After seeing the tag, I'm thinking it is an 8 ton (800?).  |
Posted By: Kenny L.
Date Posted: 21 Apr 2023 at 2:11am
|
Posted By: AC7060IL
Date Posted: 21 Apr 2023 at 10:57am
|
WF, yes indeed you have an AC 800 gear, serial 8 1093. Thanks for posting it's ID tag. DSeries4, what your 800's ID tag serial number? |
Posted By: DSeries4
Date Posted: 22 Apr 2023 at 9:48pm
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: WF owner
Date Posted: 23 Apr 2023 at 6:32am
|
I know mine is older, but I think it still had the same decal that Myron's has. With the work of applying one decal as opposed to every individual letter, I'm pretty sure it is going to have the single decal now!!! I'm not that much of a purist!
EDIT: I was surprised to see that the cat# on the tag was identical to Myron's, even though the tags were a completely different style.
|
Posted By: mruhlig77
Date Posted: 24 Apr 2023 at 7:39am
| AC 7060IL sent you a PM... |