Farm Equipment - Armature

Print Page | Close Window

Armature

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194380
Printed Date: 24 Apr 2025 at 5:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Armature

Posted By: Mikez
Subject: Armature
Date Posted: 02 Apr 2023 at 1:56pm

Came across a used armature put back in box lol. 231347. The splines are stripped where it drives power steering pump. Before I toss it wanted to check that there’s no use for it.

Thanks

Replies:

Posted By: DaveKamp
Date Posted: 04 Apr 2023 at 9:24pm

If the armature is otherwise good, putting splines back on isn't impossible... and if it's a common armature, the end can be turned to fit either a splined sleeve, or a standard belt sheave. Is the armature used on any other application? How easy is a good replacement to find?

-------------
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.

Posted By: Steve in NJ
Date Posted: 05 Apr 2023 at 4:51pm

First you need to find out what unit it fits. Could be a Delco long shaft for an 1100440/441 or 424 Diesel Gennie. If so, new Arms are available for those particular units. As Dave mentioned, those long shaft splines can be reground as long as the shaft isn't bent. I've seen where if the pumps seize, it could bend the mainshaft.... HTH

Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: Mikez
Date Posted: 05 Apr 2023 at 10:35pm

Top of parts book it says deco-Remy #1100345.

Well it’s in the junk pile under bench if anyone wants it