Pulling Forum - 8.3 cummins in a 220.

Print Page | Close Window

8.3 cummins in a 220.

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194347
Printed Date: 23 Nov 2024 at 2:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8.3 cummins in a 220.

Posted By: Agcosucks
Subject: 8.3 cummins in a 220.
Date Posted: 31 Mar 2023 at 9:31am

Is it possible to put an 8.3 cummins in a 220? I can get my hands on an adapter plate. Any advice is appreciated

Replies:

Posted By: DMiller
Date Posted: 31 Mar 2023 at 10:18am

Is an awful LARGE engine to shoehorn into a 220. Best be measuring, A LOT. It DRY weighs 1450 lbs, where even a 5.9L would be tough to squeeze in.

From a marine installer, Engine is 45"x30"x43". Typically holds 3 Gal Oil. 500cu in

Posted By: DrAllis
Date Posted: 31 Mar 2023 at 3:15pm

I'll bet if you put a tape measure on both engines, you'd find they are very close to the same overhaul length, so an installation shouldn't be too tough. My genuine concern is the fact that the peak torque numbers are far greater than the driveline was designed for and if you so choose to use it in the field and weight it down, there could be trouble down the road. I'm thinking 450-475 ft lbs at 1400 RPM was what the 426 developed. Tell me why you wouldn't want to fix the 426 or replace with another 426 engine ??

Posted By: Jordan(OH)
Date Posted: 17 May 2023 at 5:43am

This is an 8.3 in an 8030. Stock fan and shroud using the Cummins spacer.

uploads/198/E2B5973B-4472-4603-9E20-21EB6C2F63DB.jpeg" rel="nofollow - E2B5973B-4472-4603-9E20-21EB6C2F63DB.jpeg

uploads/198/8FB5586A-2B7A-444E-8D56-2E36DF70C5FB.jpeg" rel="nofollow - 8FB5586A-2B7A-444E-8D56-2E36DF70C5FB.jpeg