Farm Equipment - 8010 Muffler Needed

Print Page | Close Window

8010 Muffler Needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194203
Printed Date: 13 May 2025 at 11:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8010 Muffler Needed

Posted By: Unit3
Subject: 8010 Muffler Needed
Date Posted: 22 Mar 2023 at 4:56pm

The dealers all tell me they’ve been discontinued, and they can’t find any on their locator either. The muffler that is on it, is a Donaldson 264042—F. It has the aspirated air cleaner.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Replies:

Posted By: HagerAC
Date Posted: 23 Mar 2023 at 8:40am

Check with Hammel Equipment in Chatfield MN, they have an 8010 in salvage that had the muffler I believe last time I saw it. 507-867-4910. Troy is the guy in salvage and I believe he is on the forum as well.

-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

Posted By: SteveM C/IL
Date Posted: 23 Mar 2023 at 10:25am

Put a Thomure muffler eliminater on it. Can't tell the difference in cab.... I just got a new exhaust pipe from them...almost got the impression they were fading out (getting old and quitting)

Posted By: Leon B MO
Date Posted: 23 Mar 2023 at 11:44am

Steve Thormure has closed. I have put two eliminators on an 8050 and 8070. As Steve said no change in the cab noise wise. I can text you some pictures if you PM me your number. The 8010 would be different and I don't see one available online. But I would think if you took your muffler off and took it to a good muffler shop they can make one. I have an 8010 and will probably make my own eliminator when this muffler gives out. It's really just 3" exhaust pipe cut at several different angles to make the u-turn and then the right fitting for the turbo and a support on the end and aspirator tube.
Leon B Mo

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".

Posted By: SteveM C/IL
Date Posted: 24 Mar 2023 at 9:03pm

Well.....if you had a 30,50 or 70 u can buy a new AGCO muffler for just over $1300

Posted By: Dave7060
Date Posted: 25 Mar 2023 at 3:52pm

Thomure is still selling exhaust parts. I just got my muffler eliminator this week from them for my 8050. It’s worth the call to see if they have one for an 8010

Posted By: Unit3
Date Posted: 25 Mar 2023 at 7:48pm

I will call them about their 8010 muffler. I also think I can Weld on a 3” long 3-1/2 pipe on my muffler and expand my 90 elbow to fit over it.

There are three - 3/8” bolts that hold a bracket to the back of the head. It holds up the back of the muffler. I am happy to report I got them out without twisting them off!!!!!🍀🙏🍀🙏🍀🙏 Thank you all.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Posted By: IBWD MIke
Date Posted: 26 Mar 2023 at 8:56am

Mike Links, who posts on the Red Power board as 88 series restorer, (I think) bought Thromure's stuff and is selling it, for Red machines at least. Not sure if he has anything for other brands or not. I will do a little research and post back later today or tomorrow.

Edit; https://www.triplertractors.com" rel="nofollow - https://www.triplertractors.com

Link to Mike's website.

Posted By: Leon B MO
Date Posted: 26 Mar 2023 at 9:58am

Well that makes sense. About a month ago buddy of mine called Thormure for an 8070 eliminator but was told they were closed up. He did find one from another vendor but don't remember who.
Leon B

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".