Curved shank subsoiler point
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193072
Printed Date: 23 Nov 2024 at 3:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Curved shank subsoiler point
Posted By: tractorboy
Subject: Curved shank subsoiler point
Date Posted: 23 Jan 2023 at 4:26pm
| I bought a curved shank subsoiler , it's in pretty good shape but didn't come with a point . Probably a shot in the dark but is there a # someone has to get the correct point or do I just measure the two hole spacing & take a stab?? Guy says it was with his WD45, but seems like it would be quite a load in this red clay! thanks keith so. va. |
Replies:
Posted By: Mikez
Date Posted: 23 Jan 2023 at 5:13pm
| Do you have a picture of which subsoiler you have |
Posted By: tractorboy
Date Posted: 23 Jan 2023 at 7:05pm
| I don't have a picture, but I think it's referred to as Oxnard or a WD subsoiler, definitely too big for a CA , d10, |
Posted By: DON G
Date Posted: 23 Jan 2023 at 7:17pm
|
I have an old 1 shank subsoiler that used the WD drawbar , complete . It uses your drawbar. Would sell for $75. 
|
Posted By: Mikez
Date Posted: 23 Jan 2023 at 7:34pm
Can help you with the latter style point 406321
 |
Posted By: DSpears N IL
Date Posted: 23 Jan 2023 at 7:43pm
subsoilers were available uploads/101/CA_Subsoiler_Atkinson_9-19-04.jpg" rel="nofollow">uploads/101/CA_Subsoiler_Atkinson_9-19-04.jpg  for the CA also! |
Posted By: jaybmiller
Date Posted: 23 Jan 2023 at 8:41pm
|
this it ?  ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |