AC DD Road Grader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193023
Printed Date: 23 Nov 2024 at 7:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC DD Road Grader
Posted By: rodnil
Subject: AC DD Road Grader
Date Posted: 20 Jan 2023 at 8:39pm
| Just got a late model DD with the 6 cylinder engine. Looking for an overhaul kit. Also looking for a hood . For some reason someone in the past cut a big hole in the hood. |
Replies:
Posted By: Ross D.
Date Posted: 21 Jan 2023 at 8:24am
|
Good morning. What year is your grader? Does it have the 8" round or the 8" square main beam? Remember, we all like pictures. The extra large hole may have to be fixed with good body work Hoods will be hard to find. Ross D. |
Posted By: rodnil
Date Posted: 22 Jan 2023 at 2:02pm
| It has the square tube. I'm of the older generation so posting pictures will have to wait until my grand daughter comes for a visit. It has a cab with a factory heater and power hydraulic everything. It appears to have sat outside or some time so it has some rust but none real bad. I'm thinking it's a later model grader with most if not all of the options. I haven't located the serial number as of yet. |
Posted By: Ross D.
Date Posted: 23 Jan 2023 at 8:15am
 Hi. The serial no. will be stamped onto an aluminum plate in the location shown in this picture. The engine should be a D17 diesel 4.3 L, 6 cyl. (262 cu. in.). Do you have hydraulic rear brakes? Hope your Granddaughter can help you with the pictures. I do not have my A C books with me. We are escaping the Ontario winter weather, while enjoying a rainy Florida morning. Ross D. |
Posted By: Ross D.
Date Posted: 23 Jan 2023 at 8:19am
|
Posted By: rodnil
Date Posted: 23 Jan 2023 at 10:11pm
| Yes on the brakes , but as of now they are not in working order. When I get it home that will be the first thing to be worked on. |
Posted By: KRAKMT
Date Posted: 23 Jan 2023 at 10:38pm
| I had a jagged hole around in my hood around my exhaust. I had a local fab shop cut out a plate. Waiting for paint shop to finish painting hood and plate but it should be good to go. |