Farm Equipment - Frame width

Print Page | Close Window

Frame width

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192814
Printed Date: 27 Sep 2024 at 7:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Frame width

Posted By: grinder220
Subject: Frame width
Date Posted: 08 Jan 2023 at 7:55pm

How wide is a 170/175 frame? I have a weight bracket that I thought was for a 180-200 but after measuring it its 19.5 inches wide. I'm assuming its for a 170/175. Bolt holes are also closer than the bigger tractors.

Replies:

Posted By: DrAllis
Date Posted: 08 Jan 2023 at 8:06pm

I just installed a 185 weight bracket on my One-Seventy. Bolt holes all the same. Cut it in two on the front. Removed an 1 1/2" of material. Welded a piece of angle iron on the rear of each half at the split point. Bolted it back together, at the angle irons, mounting one side at a time by myself.