Allis chalmers 344 diesel
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=19271
Printed Date: 20 Jul 2025 at 3:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis chalmers 344 diesel
Posted By: sandk_equip
Subject: Allis chalmers 344 diesel
Date Posted: 09 Oct 2010 at 9:08pm
|
I have a 344 ac engine with a broken crankshaft. Is there anyone on here that would know where i could get a crankshaft?
|
Replies:
Posted By: gemdozer
Date Posted: 10 Oct 2010 at 7:11am
|
I have some 344 crankshafts but to heavy for shipping am located near MONTREAL CANADA.
|
Posted By: norm [ind]
Date Posted: 10 Oct 2010 at 6:52pm
|
i have a rod assy 1-800-254-3116
|
Posted By: BobsAc
Date Posted: 14 Oct 2010 at 5:11pm
|
I should have a good one if you're interested, the 6000 engine I believe also uses the same crankshaft, let me know..... Bob S.
|
Posted By: ghausner
Date Posted: 21 Oct 2010 at 4:16pm
|
There should be a tag on the side of the block that identifies your engine. From the picture it looks like you have the AC 6000 engine with deep dish pistons. If your injectors are on the side of the cylinder head you have an HD344 engine. If the injectors are on the top of the cylinder head you have a 6000 engine. If the engine has a turbo it is the 7000 engine. If you left the petcock open when you drained the block to remove the cylinder head you should not have any water damage. The first thing to do is to drain the oil pan and note how much oil and water is in there. Did the oil pump take on water? Clean the bores before removing the pistons. The rods can be damaged if you use a metal object to push the rod and piston assembly out. If you have the inframe rebuild kit you know that this is a wet sleeve engine. You will need a sleeve puller. I can be contacted at ghausner@mail2george.com
|
Posted By: ACmanOh
Date Posted: 29 Oct 2010 at 9:17am
|
I have a 344 AC Engine I can pull the crankshaft out of and check it to see if it is ok. Let me know if interested I will be glad to pull it out and have it checked. email mailto:snydereq@frontier.com - snydereq@frontier.com or call 1-330-223-1913 I am in Ohio Thanks, Rays
|
|