190 hyd pump gears wanted
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192609
Printed Date: 16 Oct 2025 at 12:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 hyd pump gears wanted
Posted By: Kevin in WA
Subject: 190 hyd pump gears wanted
Date Posted: 27 Dec 2022 at 5:41pm
|
Looking for a good set of gears for the remote section of the hydraulic pump on a 190 prior to serial number 26857, they are part numbers 70244027 and 70244030 Thanks Kevin
|
Replies:
Posted By: orange knight
Date Posted: 27 Dec 2022 at 9:57pm
I've got a good used hyd. Pump off a 190 if you're interested.
-------------
Specializing in Allis Chalmers Tractor and Equipment Parts
952-290-1063
|
Posted By: tbran
Date Posted: 30 Dec 2022 at 12:03pm
what is the thickness/width of the gears ?
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: Kevin in WA
Date Posted: 01 Jan 2023 at 11:46pm
|
The gears are 1/2 inch thick.
|
Posted By: tbran
Date Posted: 02 Jan 2023 at 10:21am
70241115 , 70244033 are available -less than $400 - don't have any loose.
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: Kevin in WA
Date Posted: 02 Jan 2023 at 7:22pm
|
tbran, those part numbers are for the steering section, I need the gears for the remote/3point section. Thanks anyway
|
Posted By: tbran
Date Posted: 02 Jan 2023 at 11:18pm
70244030 70244027 - sorry, will check tomorrow
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: tbran
Date Posted: 03 Jan 2023 at 12:00pm
70244027 about $600 new 70244030 -(316 ) four four five - 2103 shows to have one.
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: AC720Man
Date Posted: 03 Jan 2023 at 9:29pm
I just sent my gears and guts out of my XT to the recycle center a month ago. I would have gave them to ya. I’m sorry, got tired of em sitting around for 5 years. I replaced everything in my pump.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|