Print Page | Close Window

712S Allis repairs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192175
Printed Date: 23 Nov 2024 at 1:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 712S Allis repairs
Posted By: Michael Crowe
Subject: 712S Allis repairs
Date Posted: 04 Dec 2022 at 11:21am
I bought this tractor new as a 13 year old kid mowing lawns.  I am going to refresh the motor and it needs the seat redone and a new muffler.  Where can a guy find a muffler that fits like the original and where can I get the seat redone? 

Also, I acquired an electric lift for this tractor, does anyone have a wiring schematic?

Thanks. Michael


-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/



Replies:
Posted By: Steve in NJ
Date Posted: 04 Dec 2022 at 2:30pm
Mike,
Just go on the internet and plug in 712S wiring schematic. It'll probably pop right up. The schematic I'm talkin' about. LOL! Might be able to get the correct Muff at SLI. Give Brenda a call. If it has a Breaks & Scrapem' in it, its probably the short fat muff. If it has Kohler in it, the 700 series usually has that crazy mounted muffler with the pipe that goes out the hood.....
Steve@B&B


-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife


Posted By: Michael Crowe
Date Posted: 04 Dec 2022 at 7:41pm
OK, one down, I got a wiring diagram.  Now if anyone knows where to find the muffler for the 712 S tractor with the Kohler engine that would be great.  I'll check with Sandy Lake tomorrow. Yes mine is the crazy muffler with the pipe directed to the hole in the hood.

-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/


Posted By: macvette
Date Posted: 05 Dec 2022 at 5:00pm
I needed a muffler for my716H Allis with a Kohler.  Very hard to find, it seems. Finally bought one from a forum member that has a small hole in it, but mine had completely fallen apart, with no hope of any rewelding/brazing as thin as the pieces were.




Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net