Farm Equipment - D 15 spare key

Print Page | Close Window

D 15 spare key

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191909
Printed Date: 23 Nov 2024 at 6:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 15 spare key

Posted By: ACinSC
Subject: D 15 spare key
Date Posted: 21 Nov 2022 at 12:26pm

Had a couple extra keys made today. Always use the local lock and safe store. Cost $1.50 each . Went to Home Depot next and happened by their key display. Cheapest key they had was $5 . Kinda Krazy.

Replies:

Posted By: PaulB
Date Posted: 21 Nov 2022 at 6:17pm

My D15 II has the original type INDAK switch/key like most all lawnmowers out there. Some of the early D15 tractors have the Briggs & Stratton switch/Key same as all early Allis tractors that use a key. Then you may have one with a generic replacement switch of unknown origin.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: ACinSC
Date Posted: 21 Nov 2022 at 6:26pm

Never had a OE key. I recently replaced my ignition switch and just wanted a couple extra keys. Thanks

Posted By: Hubert (Ga)engine7
Date Posted: 22 Nov 2022 at 12:24pm

Local businesses are much better on knowledge and service and a lot of times less expensive than the big box stores. My D15II has an aftermarket switch and only one key. Guess I should have a spare made just in case.

-------------
Just an old country boy saved by the grace of God.

Posted By: ACinSC
Date Posted: 22 Nov 2022 at 1:55pm

Probably a good idea Hubert . Guy at the Lock and Safe place told me he has people come in all the time with a key made at the big box store that won't work . Doesn't surprise me . Thanks

Posted By: ACinSC
Date Posted: 11 Jul 2024 at 1:15pm

Had two spare keys made today at local locksmith.
Price has gone up to $4 apiece now. Both work, so I'm happy! Woman was in there having a key made also. Said the one she got at the big box store wouldn't work. I can believe that.

Posted By: Mikez
Date Posted: 13 Jul 2024 at 10:19pm

I’m curious which key do you have.

Posted By: ACinSC
Date Posted: 14 Jul 2024 at 6:09am

Sorry Mike, should have said the last two keys were for my UTV. Original keys were for my D 15 and the new switch I bought from Steve B .

Posted By: jaybmiller
Date Posted: 14 Jul 2024 at 6:27am

When I had the 'fleet' ( 4 D-14s and the forklift ) , I went to local Princess Auto and bought 5 of their 'heavy duty ignition ' switches. Went through ALL on the pegs, and found 5 with the same number stamped on the keys. Guy next to me was curious so I told him, these 5 all use the SAME key,so I only need ONE key to operate ANY of the 6 !

Yeah, probably silly but I have LOTS of spares...here ,there, everywhere.....

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water