help ID this trencher,,,,
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191401
Printed Date: 23 Aug 2025 at 5:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: help ID this trencher,,,,
Posted By: desertjoe
Subject: help ID this trencher,,,,
Date Posted: 21 Oct 2022 at 4:34pm
|
OK, I've had this Ditch Witch C99 trencher for the longest and been stored in the barn for a few years. A friendly contractor had the engine completely overhauled for me and I only used it to dig a trench for a water line 4 or 5 years ago. I remember the dang carburator giving me fits back then,,,SO, I want to order a replacement carburator for the engine. It now has an updraft carb but I ain't found one on Ebay or amazon,,,plenty of side draft carbs but no UPdrafts,,,,?? I'm thinking the engine is a Wisconsin single cylinder with numbers on tag==AENLD-2--- 408004--5909185--- Tag on the trencher frame is C99---SN113107 It would NOT be a big issue to build a different "intake" to use a newer side draft carb which are a dime a dozen on Ebay ($22) I got some pics to see if someone can ID the carburator,,,,,,
   |
Replies:
Posted By: jaybmiller
Date Posted: 21 Oct 2022 at 5:45pm
|
DJ... use Google " AENLD-2" you'll get a zillion 'hits'..... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DaveKamp
Date Posted: 22 Oct 2022 at 12:50pm
|
Darnit, Joe- If you wanna us to identify the CARBEURATOR... then git in there and post a picture of the CARBEURATOR... from that angle and distance, it could be ANYTHING... Zenith, Tillotson, Marvel Schebler, Bendix... Good thing it has a starter-generator on it, my buddy has one of those trenchers on steel tracks... rope start. ------------- Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest. |
Posted By: desertjoe
Date Posted: 22 Oct 2022 at 10:35pm
|
Chit Dave,,,ole Buddy,,,ole pal,,,,,,  I WAS SOME PRE-MATURE ON THIS ONE AS i AM GOING TO REMOVE IT TAMARROW,,, I have bad memories with that carb as it was always tempermental SOB even after a complete clean out and new carb kit The contractor told me that he put a kit in it also,,,!!! I'm thinkin bout machining two plates with the bolt pattern of the intake but with a straight 1" nipple welded between the two flanges to mount a carb that is NOT an updraft I did find some "NEW" rooskie made carbs on Ebay that are listed for the Ferguson TO 20 tractors,,,,reckon one of them would work,,?? That starter is also a generator and is 12 volt and works many wonderfuls
 |
Posted By: shameless dude
Date Posted: 23 Oct 2022 at 2:42am
| gits you another engine for it....a more modern one! |
Posted By: desertjoe
Date Posted: 23 Oct 2022 at 7:49am
|
Well, CHIT,,,,and,,,,and,,,I thought he was my buddy,,,,,,
 |