Construction and other equipment - Allis Chalmers Track Loader GD 6 G

Print Page | Close Window

Allis Chalmers Track Loader GD 6 G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190355
Printed Date: 30 Nov 2024 at 3:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers Track Loader GD 6 G

Posted By: Hill Top Ranch
Subject: Allis Chalmers Track Loader GD 6 G
Date Posted: 29 Aug 2022 at 3:57pm

I have a Allis Chalmers HD 6 G late model track loader. I need information on how to install the pin that holds the brake operating pin to the bell crank.

Replies:

Posted By: gemdozer
Date Posted: 29 Aug 2022 at 7:25pm

You should have a plug on side housing rear the sprocket

Posted By: Hill Top Ranch
Date Posted: 30 Aug 2022 at 9:14am

The pin goes in front of the sprocket and not the rear.

Posted By: gemdozer
Date Posted: 30 Aug 2022 at 10:21am

Yes the pine go in front sprocket hole and that pine have a center hole and you can use a fine screw driver in the hole for pushing the pine in bellcrank