Gleaner transmissions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189677
Printed Date: 24 Aug 2025 at 9:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gleaner transmissions
Posted By: DSeries4
Subject: Gleaner transmissions
Date Posted: 24 Jul 2022 at 1:30pm
Can anyone tell me which other transmissions are interchangeable with one in an E3 combine? I am pretty sure the K is. Would the F be the same?
Asking for a neighbor.
Thanks!
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Replies:
Posted By: DrAllis
Date Posted: 24 Jul 2022 at 4:02pm
|
No way an "F". Probably a K.
|
Posted By: AC7060IL
Date Posted: 25 Jul 2022 at 7:57am
DseriesIV, probably all older model Es & all early model Ks(1969-1977). Should check part number though?? I can check later when I’m back in my office.
Later 7-25-22 Edit/update:The older E trans’ beam/tube assy MOUNTINGS differs from EIII/K/K2 models. The E’s trans mountings are positioned on top of their trans. The EIII/K/K2’s trans mountings are positioned on front of their trans. Hence the difference in their CASE trans part#s as follows.
E parts catalog, May 1967 shows following;
Case, trans 71131408(prior trans 3-63-0001).
Case, trans 71131690(Eff. Trans 3-63-0001&up).
EIII/K parts catalog,Sept 1972 shows following;
E3 & K trans case assy part# is 71151727.
K trans shafts,axle drives differ @ sn18601.(may or may not affect, trans swap??)
EIII/K trans clutch bell housing part# 71145047.
71141628-beam asy,axle(EIII;prior an K 5001).May or may not affect swap?
71153760-beam asy,axle(Eff. An K 5001-8201). May or may not affect swap?
K2/F2 parts catalog, Oct 1978 shows following;
K2 trans case assy part# 71151727 (same as EIII/K).
Note; the 71151727 EIII/K/K2 transmissions should readily interchange. The E will not readily interchange to EIII/K/K2s without at least beam/tube fabrications.
While doing a 71151727 trans swap, take the opportunity to RE-SEAL drive shaft SEALS (2 - Left & Right sides, part# 71145028) on usable trans before re-installing it.
|
Posted By: DSeries4
Date Posted: 25 Jul 2022 at 5:33pm
My neighbor just bought a K that has been sitting many years. Looks to be an older one, so hopefully the transmission will fit the E3 without any major problems.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: fjdrill
Date Posted: 25 Jul 2022 at 7:31pm
|
Early k and E3 the same. I went to south central MS and cut up a K for parts. I salvaged everything except engine for my E3.
|
Posted By: AC7060IL
Date Posted: 26 Jul 2022 at 12:50am
|
Back to top because of edits/updates
|
|