715D info
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188918
Printed Date: 30 Nov 2024 at 3:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 715D info
Posted By: Robert Riggers
Subject: 715D info
Date Posted: 16 Jun 2022 at 4:12pm
|
I have just received a 715D plate numbers are as follows any help would be greatly appreciated 715b-L 715D 1715 132874 |
Replies:
Posted By: Gary
Date Posted: 16 Jun 2022 at 6:14pm
|
Link to 'TractorData' Website https://www.tractordata.com/backhoe-loader/000/0/9/98-allis-chalmers-715d.html" rel="nofollow - https://www.tractordata.com/backhoe-loader/000/0/9/98-allis-chalmers-715d.html |
Posted By: DiyDave
Date Posted: 16 Jun 2022 at 7:45pm
If the serial # is 1715, its a 1975...
 ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Robert Riggers wrote:Posted By: Coke-in-MN
Date Posted: 18 Jun 2022 at 10:27am
|
http://www.tractordata.com/backhoe-loader/000/1/9/190-allis-chalmers-715b.html%20" rel="nofollow - http://www.tractordata.com/backhoe-loader/000/1/9/190-allis-chalmers-715b.html
My 715B/D with enclosed cab , with Digmore extenda-hoe I bought from municipality here in MN with 2,000 hours on it - somewhere around 8,000 now . Rear tires are 18.4 x 24 rather than as listed 16.9 x24 Just rebuilt the Fwd x Rev box and replaced torque converter , got parts from a marine supply company as the same box is used on many boats . Later 715D machines along with the CDS built machines used a different engine than Perkins . Talking with a AC equipment dealer in Wisc years back he mentioned the original machines of 715 were better machines than later units . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Robert Riggers
Date Posted: 03 Jul 2022 at 6:55am
| Which suppliers did you get the parts from? |
Posted By: Robert Riggers
Date Posted: 03 Jul 2022 at 4:47pm
| Which marine supplier did you get the parts from in the torque converter that would be a great assistance |
Posted By: Coke-in-MN
Date Posted: 04 Jul 2022 at 1:00pm
|
https://www.youtube.com/watch?v=x42297Qhi4o%20" rel="nofollow - https://www.youtube.com/watch?v=x42297Qhi4o
https://www.youtube.com/watch?v=2GsXT37v8Aw" rel="nofollow - https://www.youtube.com/watch?v=2GsXT37v8Aw Hale Marine ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Coke-in-MN
Date Posted: 04 Jul 2022 at 11:53pm
|
https://www.joseph.com/ https://www.joseph.com/" rel="nofollow - Welcome to Joseph Industries -- Quality Driveline Parts and Outstanding Service. ยท Industrial driveline components and remanufacturing service for material ...
------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: KRAKMT
Date Posted: 05 Jul 2022 at 10:18am
|
I think I used Joesph industries for torque converter and pump. You will need to center the pressure plate. If pulling shuttle, you might consider rebuild while it is out. |