Farm Equipment - B driveshaft question

Print Page | Close Window

B driveshaft question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188881
Printed Date: 23 Sep 2025 at 5:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: B driveshaft question

Posted By: ORBill
Subject: B driveshaft question
Date Posted: 14 Jun 2022 at 11:15pm

I am in the process of restoring an early B with parts from a '39 and '40. Both have transmission to clutch driveshafts with "u" joints, one is frozen, the other one is pretty loose. Is it OK to use a later solid shaft?

TIA

Bill

Replies:

Posted By: PaulB
Date Posted: 15 Jun 2022 at 6:09am

No reason why not. Although check the splines on the donor shaft and those on the input to the transmission.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: ORBill
Date Posted: 15 Jun 2022 at 11:06am

Thanks Paul

I didn't want to get it to the point of reassembly and force something that shouldn't be.