D 14 oil line question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187295
Printed Date: 01 Oct 2025 at 2:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 14 oil line question
Posted By: hendricsp@aol.com
Subject: D 14 oil line question
Date Posted: 27 Mar 2022 at 12:03pm
|
There are two oil lines in the governor one goes to the T on the block. Where does the other line go? Also does the oil line on the side of the oil filter base for the oil pressure gauge? Thanks in advance |
Replies:
Posted By: steve(ill)
Date Posted: 27 Mar 2022 at 12:31pm
Peter, you put your question in the "FORUM TALK" section.. Not as many LOOKERS in this area.......... You will get a lot more attention if you repost in the "FARM EQUIPMENT" forum at the top of the FORUM LIST PAGE.
 ------------- Like them all, but love the "B"s. |
Posted By: hendricsp@aol.com
Date Posted: 27 Mar 2022 at 12:45pm
| Thanks I see the line on the governor but I don’t see where it goes? Almost looks like it goes to the distributor from your picture. Thanks |
Posted By: jaybmiller
Date Posted: 27 Mar 2022 at 1:06pm
|
jes follow the tubing... it goes vertically into a TEE, the top,right of the guv, there's a short piece of tubing from the T to the dist. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: CTuckerNWIL
Date Posted: 30 Mar 2022 at 8:54am
|
Moved from "Forum Talk" page. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |