Farm Equipment - "B" Throttle Rod

Print Page | Close Window

"B" Throttle Rod

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186580
Printed Date: 28 Aug 2025 at 2:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: "B" Throttle Rod

Posted By: cfciii03
Subject: "B" Throttle Rod
Date Posted: 21 Feb 2022 at 2:38pm

Have a 1955 A/C model B. How do i set the throttle rod ?

Thanks.

Replies:

Posted By: steve(ill)
Date Posted: 21 Feb 2022 at 3:37pm

The governor rod goes across the front of the motor from the governor, under the thermostat housing, and sticks out on the left side. A second rod is connected at that point to the carburetor............ Disconnect the carb rod from the governor rod.....Set the THROTTLE lever wide open...... pull the carburetor rod wide open... See that the carburetor rod aligns with the hole in the governor rod at the front left of engine... If not, BEND the governor rod so the carburetor rod fits in with a slight PULL on the rod, ( no slop)............... thats it.

-------------
Like them all, but love the "B"s.