D-10 series III
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186459
Printed Date: 10 Sep 2025 at 1:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-10 series III
Posted By: Dusty MI
Subject: D-10 series III
Date Posted: 15 Feb 2022 at 8:38pm
|
How rare is the 2 speed gear box ahead of the transmission on the D-10 & D-12 ? I have a '65 D-10 with it. And seems it would be neat to have a matching D-12.
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Replies:
Posted By: DSeries4
Date Posted: 15 Feb 2022 at 9:31pm
|
If you can find one, you will pay dearly to get it. Hard to find a tractor for sale with it. Finding the gear box alone would be harder still. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: keithpearson
Date Posted: 16 Feb 2022 at 5:25am
|
I have D10 series 3 with the factory front weight and the high low. I got it cheap because it had been sitting for a few years. Did a few minor repairs and she purrs like a kitten.. ------------- WD45,160 6040,D14,D15,D17,D19,D21,and still looking for more |
Posted By: corbinstein
Date Posted: 16 Feb 2022 at 6:13am
|
who makes those HI/LO? Sherman maybe?
|
Posted By: Charlie175
Date Posted: 16 Feb 2022 at 6:15am
|
There was one just recently on FB for $5000 (D10). I am sure it's gone now. I think this was an Allis design ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: DrAllis
Date Posted: 16 Feb 2022 at 6:31am
| An OPTION from the Factory. |
Posted By: keithpearson
Date Posted: 16 Feb 2022 at 6:55am
|
Mine is factory ------------- WD45,160 6040,D14,D15,D17,D19,D21,and still looking for more |
Posted By: Charlie175
Date Posted: 17 Feb 2022 at 12:34pm
I think the question was who made the hi/lo components. Were they Allis or someone else ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
keithpearson wrote:Posted By: DrAllis
Date Posted: 17 Feb 2022 at 1:45pm
| ALLIS-CHALMERS FACTORY INSTALLED OPTION. |
Posted By: JoeO(CMO)
Date Posted: 17 Feb 2022 at 7:00pm
|
The Series III HI-Lo along with Forward-Reverse is a different torque tube assembly than a Standard 4 speed. If you want a Hi=Lo when you have a standard 4 speed you will have to change torque tube,,,but that is not all you will need to find!! Look for a III with hi-lo!
|