Construction and other equipment

Print Page | Close Window

645B Wheel Studs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186162
Printed Date: 30 Nov 2024 at 5:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 645B Wheel Studs

Posted By: Amos
Subject: 645B Wheel Studs
Date Posted: 02 Feb 2022 at 4:42am

I am on the hunt for a few wheel studs for my loader does anyone know where I could source them?

Replies:

Posted By: Codger
Date Posted: 02 Feb 2022 at 6:25am

Do you have any punched out or a photo from a manual?

Posted By: 8070nc
Date Posted: 02 Feb 2022 at 7:28am

If you can take one to a truck parts store you should be able to match them up. Euclid has a catalog with full size pictures and dimensions

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: Amos
Date Posted: 03 Feb 2022 at 5:21am

not one out have to pull the hub and then remove the brake drum to get them out was hoping to have all the parts here before tearing it down that far.

Posted By: Alvin M
Date Posted: 03 Feb 2022 at 6:49am

Minn Par has the brake down on line and parts

Posted By: Mikez
Date Posted: 03 Feb 2022 at 8:23am

I’m curious to what the part number is. Anyone have parts book

Posted By: Alvin M
Date Posted: 03 Feb 2022 at 10:25am

Mikez Minn Par on line look up

Posted By: Amos
Date Posted: 03 Feb 2022 at 11:21pm

Found my parts manual 3022121-2 stud and 3007152-6 is the nut