Shops, Barns, Varmints, and Trucks - Moving this dang snow

Print Page | Close Window

Moving this dang snow

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185832
Printed Date: 21 Aug 2025 at 11:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Moving this dang snow

Posted By: 200Tom1
Subject: Moving this dang snow
Date Posted: 16 Jan 2022 at 10:58pm

I came home tonight and put a new selonoid on the skid loader tonight. Starter still wouldn't work, ford selonoid like used to be on the fender of every pickup. With the switch off I had 12 volts coming out of every one of the 4 terminals. I think it is a 20.00 hunk of junk. Will go to NAPA and get a good 1. Probably cost me $40.00. And them to figure out the snow plow wiring on the plow truck. Ts a home made harness. Gots to be a loose wire is a bad selonoid too. Everything works but the dang plow won't go up or down or side the side.

Replies:

Posted By: Dave H
Date Posted: 17 Jan 2022 at 4:11am

Dang, it sounds like you got a little on the back side of the power curve thee. We got a couple of dustings here. Was thinking today that I have never gone this far into the winter and did nothing in preparation, like at least getting the blade on the back of the tractor.

Hopefully you got a little heat out there and you start getting some bingo's.

Posted By: shameless dude
Date Posted: 17 Jan 2022 at 11:53am

awwww http://www...Tom....what" rel="nofollow - www...Tom....what would you rather have? some pretty snow or some pretty goats?

Posted By: thendrix
Date Posted: 17 Jan 2022 at 12:39pm

I'll take the goats

-------------
"Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan

Posted By: tadams(OH)
Date Posted: 18 Jan 2022 at 1:42pm

Me too hendrix