Print Page | Close Window

Block Heater for HD5G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185138
Printed Date: 30 Nov 2024 at 10:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Block Heater for HD5G
Posted By: Les Kerf
Subject: Block Heater for HD5G
Date Posted: 14 Dec 2021 at 8:01pm
My Son-in-law's HD5G with 2-71 DD could definitely benefit by having some sort of 120 VAC engine block heater; any recommendations will be appreciated.
Thanks for the help Smile



Replies:
Posted By: Coke-in-MN
Date Posted: 14 Dec 2021 at 8:10pm
Block heater won't work but a tank heater and line from block drain back to thermostat area will , or a lower hose heater in that hose from radiator to water pump . 

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."


Posted By: DiyDave
Date Posted: 15 Dec 2021 at 4:49am
Google says this one is what you want.  Not sure where it mounts.

https://www.zoro.com/kats-diesel-engine-heater-for-detroit-diesel-30318/i/G8731801/" rel="nofollow - https://www.zoro.com/kats-diesel-engine-heater-for-detroit-diesel-30318/i/G8731801/

Like Coke, I prefer the tank type, just be sure to mount it vertical!Wink


-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: Les Kerf
Date Posted: 17 Dec 2021 at 8:04am
Originally posted by DiyDave DiyDave wrote:

Google says this one is what you want.  Not sure where it mounts.

https://www.zoro.com/kats-diesel-engine-heater-for-detroit-diesel-30318/i/G8731801/" rel="nofollow - https://www.zoro.com/kats-diesel-engine-heater-for-detroit-diesel-30318/i/G8731801/

Like Coke, I prefer the tank type, just be sure to mount it vertical!Wink


I too prefer the tank type, I was just hoping that someone may have actually installed one and could give some specifics about it.

I ventured out yesterday and looked the machine over; the lower block drain is readily accessible but looks rather small. Not sure where to tap in on the thermostat housing area though.

The lower radiator hose looks to be the easiest but the highest wattage I can find readily available is only 600 watts. Hmmm... Confused



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net