Construction and other equipment - H3 Steering Clutch Discs

Print Page | Close Window

H3 Steering Clutch Discs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184510
Printed Date: 30 Nov 2024 at 8:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 Steering Clutch Discs

Posted By: randymcc
Subject: H3 Steering Clutch Discs
Date Posted: 10 Nov 2021 at 4:38pm

I am working on a 1963 H3 that sat outside and has not run in 10 years. Both steering clutches are stuck. I have disassembled one and it has the bi-metal driving discs. Can I sand the rust from these and reuse them? The dozer will be used about 2 hours a month and it will be stored inside. Randy

Replies:

Posted By: Tracy Martin TN
Date Posted: 10 Nov 2021 at 4:58pm

Not worth the effort IMHO. Tracy

-------------
No greater gift than healthy grandkids!

Posted By: Ray54
Date Posted: 11 Nov 2021 at 12:04pm

I have used a wire cup brush on angle head grinder to clean ones from a Cat. Worked fine. So I see no reason it would not work on yours.

If the drive teeth are showing ware probably better to just get new. General Gear seems to have after market clutch plates for just about all crawlers.

Posted By: Ages Cat
Date Posted: 11 Nov 2021 at 2:32pm

Do the discs meet minimum thickness specs?

-------------
Curt Anderson
HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,

Posted By: Rick
Date Posted: 11 Nov 2021 at 4:37pm

I would say it all depends on how rusty they are...some are far worse than others. If minor, I would try sanding them...that's IF they are thick enough...half worn out you might as well just get the new ones from General Gear in Boise Idaho...they'll fix you up with new steels and metallic discs and they'll last a long time...just my opinion...Rick

Posted By: orangeman
Date Posted: 12 Nov 2021 at 7:01am

X 2 on the General Gear Boise Idaho recommendation.

Orangeman