Garden Tractors

Print Page | Close Window

718H

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179929
Printed Date: 23 Nov 2024 at 4:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 718H

Posted By: DaveWisc.
Subject: 718H
Date Posted: 18 Apr 2021 at 12:03pm

Ok I am having a problem with the deck I don’t know if the cone drive is the problem or if the belt from the cone drive to the deck is not tight enough but I can stop the deck in not very heavy mowing . How can I check the cone drive to see if it is the problem . I checked all the bearings on the deck and all are good. The belt that is on the cone drive is a type I call A size pretty small don’t know if that belt should be a B size or not. Help if you can Thanks Dave

Replies:

Posted By: ac55tractor
Date Posted: 18 Nov 2021 at 8:59pm

Dave

You should be able to check the inside of the cone without pulling it off. You should see a band inside the cone. It is roughly 3/16 thick. From what I understand from you, there is a good chance that it is warn away.

If the band is still visible. It may be the belt length. What size mower deck do you have? Do you know the model number from the deck? Do you know what size belt is there now?

In the end, I went to a B size belt and went one size up on the length to compensate for the wider width of the belt. It works so much better with the wider belt.

Steve (Maine)