Wanted Loader brackets
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179892
Printed Date: 04 Nov 2025 at 12:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wanted Loader brackets
Posted By: PaulB
Subject: Wanted Loader brackets
Date Posted: 17 Apr 2021 at 6:44am
|
I'm looking to find a pair of the rear mounting brackets for a 400 series loader on a d14/15 tractor. The RH bracket would be 70344904 or 343362. The LH bracket would be 70344905 or 70343363. Even just 1 would be a big help.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Replies:
Posted By: DON G
Date Posted: 17 Apr 2021 at 9:45pm
| I easily made some for D17. |
Posted By: PaulB
Date Posted: 18 Apr 2021 at 6:51am
|
D17 brackets are just a bent piece of angle, completely different from the weldment for a D14/15. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DON G
Date Posted: 18 Apr 2021 at 8:11pm
|
OK Paul. 
|
Posted By: Joe(TX)
Date Posted: 18 Apr 2021 at 9:51pm
This is what the D14/D15 brackets look like. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: orangereborn
Date Posted: 15 May 2021 at 10:01pm
| Paul...Did you get this resolved...Dale |
Posted By: Kenny L.
Date Posted: 17 May 2021 at 8:11pm
Here are some pictures of my 415 on my D15II, when I bought it the owner said he bought the tractor and loader new at the same time.    |
Posted By: PaulB
Date Posted: 17 May 2021 at 8:44pm
|
Yep, that's what I'm looking for.
What is the size and thickness of the angle that they are made from? ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Gary
Date Posted: 18 May 2021 at 3:55pm
|
Paul Took some measurements of the brackets of my 415 loader. Mine are like those in the actual orange pictures, which you note are different from the sketch from the Parts Catalog. The Horizontal piece: 2 1/2 X 3" 10" long L, 3/8" thick, 2 holes 7 1/8" apart. The horizontal side with holes is 3" wide, vertical side is 2 1/2" high. Sloped piece with 'U' bolt: 3 1/2 X 3 1/2" 9 1/2" long, 3/8" thick, welded to Horizontal piece @ 45' 'U' Bolt is 3/4" diam. The welded position of the sloped piece would be critical because the frame is bolted with 3 bolts to the Engine side frame / rail. Probably best to assemble everything in position and tack weld first. HTH Gary |
Posted By: PaulB
Date Posted: 18 May 2021 at 7:06pm
|
Thanks: That give me something to go on if I'm unable to find a pair. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DON G
Date Posted: 19 May 2021 at 8:22am
|
If you can't find a u bolt an angle iron with holes drilled will work on top, then use bolts. |
Posted By: JimIA
Date Posted: 19 May 2021 at 1:54pm
|
I think we have some NOS ones here. I will try to get a picture of them. Jim ------------- An open eye is much more observant than an open mouth |
Posted By: JimIA
Date Posted: 19 May 2021 at 4:20pm
 ------------- An open eye is much more observant than an open mouth |
Posted By: JimIA
Date Posted: 19 May 2021 at 4:23pm
------------- An open eye is much more observant than an open mouth |
Posted By: JimIA
Date Posted: 19 May 2021 at 4:24pm
|
Shipping tag number says 387416. ------------- An open eye is much more observant than an open mouth |
Posted By: ZachD89
Date Posted: 19 May 2021 at 6:44pm
|
I have a pair of those brackets and did not even know what they are till now. ------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner |
Posted By: Kenny L.
Date Posted: 19 May 2021 at 6:49pm
Show off You been holding out on me again I see.
|
JimIA wrote:Posted By: Kenny L.
Date Posted: 19 May 2021 at 6:55pm
Gary thanks for taking the time to measure the bracket, I'm dealing with a leg injury and don't know if I could've got the measurements but would've tried if you didn't post them.
|
Posted By: Alex09(WI)
Date Posted: 19 May 2021 at 9:05pm
hahaha! That was pretty awesome of Jim! Just like magic! ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: JimIA
Date Posted: 19 May 2021 at 11:52pm
|
Kenny, I can't give you all my secrets! ------------- An open eye is much more observant than an open mouth |
Posted By: Kenny L.
Date Posted: 20 May 2021 at 6:51am
I know buddy, you've been good to me over the years with your secrets, see you Saturday.
|
Posted By: structures
Date Posted: 16 Apr 2022 at 9:27am
|
Gents, I bought a 400 loader with I think 45 brackets. Wondering if either somebody has the D15 brackets for sale or if I could get a little more detail on the U bolts. Is that 7-1/8" spacing (Gary mentions above) on center or inside dimension? Thanks for the help. ------------- Robert http://www.allischalmers.com/forum/forum_posts.asp?TID=82702&KW=structures&title=structures-1964-allis-d15-series-ii" rel="nofollow - 1964 D15 Series II |