720 vs 620
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179438
Printed Date: 23 Nov 2024 at 9:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 vs 620
Posted By: DaveWisc.
Subject: 720 vs 620
Date Posted: 29 Mar 2021 at 8:24pm
| What is the difference ???? |
Replies:
Posted By: AC720Man
Date Posted: 29 Mar 2021 at 8:46pm
|
Different decals and the 720 came with 3 point hitch, pto. Also a complete line of new implements were made for it. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: DSeries4
Date Posted: 29 Mar 2021 at 9:12pm
620 has 3 point and pto as well. Basically the same tractor with different decals. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
AC720Man wrote:Posted By: DaveWisc.
Date Posted: 29 Mar 2021 at 9:22pm
| Same motor |
Posted By: Steve in NJ
Date Posted: 30 Mar 2021 at 7:01am
|
The only difference I see in 620 vs the 720 is the decals myself. Drivetrain, attachments and sheetmetal all look the same to me. The 616 is a little different as far as the electrical end of it, and the engine. (CCKA vs CCKB) But I think for the most part, the running gear is also the same as its cousins.... Steve@B&B
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: AcFordHawk
Date Posted: 30 Mar 2021 at 9:11am
|
720 generally had the heavier duty front axle although some early ones still had the lighter duty axle. Can tell the difference by the bigger "hats" on the spindles. ------------- IB (restoring), MF GC1705, MF 2705E |
Posted By: Steve in NJ
Date Posted: 30 Mar 2021 at 9:11pm
|
From what I understand, you could get the heavier from axle with the 620 as well. Not sure how accurate that is, but that's what I was told years back when I first started getting into them. Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: AC720Man
Date Posted: 30 Mar 2021 at 9:35pm
|
I’m going by the AC book of knowledge...... ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |