653 steering
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177315
Printed Date: 01 Dec 2024 at 6:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 653 steering
Posted By: Bsumudd
Subject: 653 steering
Date Posted: 06 Jan 2021 at 3:25pm
Gents,
My 653 stopped turning left. It was a slow decline, but it just up and stopped working. So I broke down and took it into a mechanic. They took a look and said that the power steering valve (one under the seat is leaking). Also said that I had what looked like water mixed into the hydro oil and that the level was too high causing oil to fill into the brake area turning my dry brake into a wet oily mess that didn’t work at all.
I have two questions.
1. Does that make sense to you as far as the inability to turn, or could there be something else going on. (Prior to it going out we did tighten the brake which seemed to work for a bit before it stopped working all together. )
2. Does anyone know where I could find the seals to replace the power steering assembly or what would you recommend to fix this old girl.
Thanks guys.
|
Replies:
Posted By: Coke-in-MN
Date Posted: 06 Jan 2021 at 7:15pm
MinnPar - Mpls MN
Try washing the brake housing out with a solvent as clutch and brake will be oil soaked
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: Bsumudd
Date Posted: 06 Jan 2021 at 7:48pm
I thought they were out of business.
I’ll google it and check it out! Thanks.
|
Posted By: Ages Cat
Date Posted: 06 Jan 2021 at 8:18pm
MINNPAR moved their inventory to Kansas City, I was told. Their webiste will give you availability if you have part numbers.
-------------
Curt Anderson
HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,
|
Posted By: Bsumudd
Date Posted: 15 Jan 2021 at 10:36pm
So I may be close to a solution. I contacted the fine folks at kwik Parts
http://kwikpartsllc.com/contact/" rel="nofollow - http://kwikpartsllc.com/contact/
Who were able to find at least one of every seal that I need to get my dozer back up and running. Since some of the seals I need two of, I am having a local hydraulic shop guy fabricate some (and extras). Hopefully that will work and I can get her back up and running.
Again can’t stress enough how easy to work with all the folks at kwik parts were. Give them a call.
|
|