anyone interested
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177260
Printed Date: 23 Nov 2024 at 8:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: anyone interested
Posted By: tbran
Subject: anyone interested
Date Posted: 03 Jan 2021 at 11:13pm
|
found a rare 718 with overhead valves.. kind of rough but runs and has no issue with valve seats. Customer wants 800,,,, ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Replies:
Posted By: Gary
Date Posted: 04 Jan 2021 at 6:14pm
|
Is your 718 a member of the larger 716 and 720 Series or is it a member of the smaller 710 and 712 Series? G |
Posted By: DaveWisc.
Date Posted: 04 Jan 2021 at 6:42pm
| I overhauled my 718H last year it cost me around 1500 to do. I did everything to it new piston valves rod and all machine work. |
Posted By: Billoh
Date Posted: 05 Jan 2021 at 4:04pm
|
tbran Does your mother in law still drive truck for you ???????? Just asking ??????????? later Bill
|
Posted By: HudCo
Date Posted: 18 Jan 2021 at 7:16pm
| what about balance gears and shafts ? it seems to me that if they are not replaced on those old k engines they just dont last that long any more now that they have a zillion hours on the blocks and cranks |
Posted By: talntedmrgreen
Date Posted: 01 Mar 2021 at 8:27pm
The 718, 716, 712 and 710 are all the same size (Kohler singles). The 616/620/720 are the larger Powermax (Onan twins). ------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494 |
Gary wrote:Posted By: talntedmrgreen
Date Posted: 01 Mar 2021 at 8:28pm
|
718's have a collector following, but I can't see $800 for even a decent one. I got $700 for the one I had, but it was an extremely nice, all orginal, good running machine, with deck and optional rear lift. Took me a couple weeks to sell, too. ------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494 |
Posted By: Dusty MI
Date Posted: 02 Mar 2021 at 7:16am
|
A few years ago I bought a 720 that the engine had been replaced. It's got a loader on it, I use it a fare amount. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: ac fleet
Date Posted: 05 Mar 2021 at 10:59am
|
when the balance gear bearings go out,--it usually breaks the mounting pin off! --got several here runnin without gears in them! LOL! ------------- http://machinebuildersnetwork.com/ |