slatted mo-boards
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175323
Printed Date: 02 May 2024 at 1:17am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: slatted mo-boards
Posted By: KP4620
Subject: slatted mo-boards
Date Posted: 21 Oct 2020 at 9:57am
Can you still find and buy parts for the allis slatted plows?
|
Replies:
Posted By: Ky.Allis
Date Posted: 21 Oct 2020 at 9:59am
You might find used parts--if your lucky. Nothing new available
|
Posted By: SteveM C/IL
Date Posted: 21 Oct 2020 at 10:11am
Was a 4bttm slat in the classifieds last few months. In Illinois so not too far.
|
Posted By: Bill_MN
Date Posted: 21 Oct 2020 at 4:47pm
I restored a slat plow 11 years ago and back then it took me a couple months just to find some nice used slats. Wear parts are also unique to the slat plows and are hard to find but not impossible. I think the outfit that bought out Crescent Forge as well as the Plow Man in MN have them yet.
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow
|
Posted By: Tracy Martin TN
Date Posted: 21 Oct 2020 at 5:18pm
Dave the plowman, he is your best bet. There are numerous slatted bottoms. Which plow and pics would help. HTH Tracy
------------- No greater gift than healthy grandkids!
|
Posted By: Alex09(WI)
Date Posted: 21 Oct 2020 at 9:05pm
There are still NOS parts for slat bottoms out there. We have some NOS slats and shins for those bottoms and other misc parts.
------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
Posted By: Mikez
Date Posted: 21 Oct 2020 at 9:21pm
Put some part numbers up. We can see what we have
|
Posted By: Alex09(WI)
Date Posted: 22 Oct 2020 at 10:23am
374 Slat bottom:
344202 frog 344192 16" HD point 344868 16" point 347437 16" point for stoney ground 338006 short landslide 325547 shin 331035 slat 331036>349710 slat 331037>349711 slat 331038>349712 slat 335098 brace 337916 brace 331044 support 331046 support Spacers: (3) 331049, (1) 340561
------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
Posted By: DaveWisc.
Date Posted: 22 Oct 2020 at 5:46pm
When I was farming I had a slate bottom AC plow.Even then parts were had to come by and not cheap.
|
Posted By: DaveWisc.
Date Posted: 22 Oct 2020 at 5:51pm
I do have new old stock lates for 375 bottoms
|
Posted By: FREEDGUY
Date Posted: 22 Oct 2020 at 6:34pm
I've seen pictures of the slat moldboards, but what was their purpose ?
|
Posted By: bigal121892
Date Posted: 22 Oct 2020 at 7:16pm
FREEDGUY wrote:
I've seen pictures of the slat moldboards, but what was their purpose ? |
For sticky soils, there was less plow surface to scour, therefore the plow stayed cleaner.
|
Posted By: DrAllis
Date Posted: 22 Oct 2020 at 7:25pm
And for not so sticky soils, the plow pulled a little easier due to half the surface to drag the soil over. We pulled 3 x 16's slat bottoms with our WD45 when normally it would have been 3 x 14's with a regular moldboard.
|
Posted By: FREEDGUY
Date Posted: 22 Oct 2020 at 7:31pm
Thanks, makes alot of sense now . Did all manufactures offer the slat bottom ?
|
Posted By: Mikez
Date Posted: 22 Oct 2020 at 8:34pm
Ok have cards on 344202 344192 331036 331037 335098 331044 331046 340561
|
Posted By: Kenny L.
Date Posted: 22 Oct 2020 at 9:31pm
[QUOTE=Mikez]Ok have cards on 344202- frog assy r.h. 374 bottom no.60,70,80&9000 series plow 344192- blade bullet (hd) 16"rh w/4 bolt holds. 374 bottom no.60,70,80&9000 series plow 331036- slat assy second r.h. 364 bottom no. 60,70 & 80 series plow 331037- slat assy third r.h.364 bottom no. 60,70 & 80 series plow 335098 don't know 331044- support slat r.h. front half. 374 & 364 bottom no. 60, 70, 80 & 9000 series plow 331046- support slat r.h. rear half. 374 & 364 bottom no. 60, 70, 80 & 9000 series plow 340561- spacer l.h. & r.h 14" & 16" 374 & 364 bottom no. 60, 70, 80 & 9000 series plow Out of a July, 1968 plow parts book
|
Posted By: IBWD MIke
Date Posted: 23 Oct 2020 at 8:34am
FREEDGUY wrote:
Thanks, makes alot of sense now . Did all manufactures offer the slat bottom ? | IH did, not sure if any others did or not. I think parts for red slat bottoms are hard to come by too.
|
Posted By: Bill_MN
Date Posted: 23 Oct 2020 at 9:33am
Oliver had the "rooster comb" plow and Avery I believe also offered them.
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow
|
Posted By: bigal121892
Date Posted: 23 Oct 2020 at 4:00pm
Posted By: AllisFreak MN
Date Posted: 23 Oct 2020 at 8:03pm
I have an opportunity to acquire one of these slat plows fairly cheap. It's in good shape. are they any good in sandy soils ?
------------- '49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2
|
Posted By: DaveWisc.
Date Posted: 23 Oct 2020 at 8:42pm
Better in Muck or a high organic soil that doesn’t stay together
|
Posted By: HD6GTOM
Date Posted: 23 Oct 2020 at 11:24pm
I have plowed with them in different soil. I never saw much difference in the job done in different soil type.
|
|