Pertronix ignition help
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175320
Printed Date: 27 Apr 2024 at 8:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Pertronix ignition help
Posted By: bobkyllo
Subject: Pertronix ignition help
Date Posted: 21 Oct 2020 at 8:19am
Are any of you guys good with this type of ignition? I'm struggling to find someone that can help me.
I've got a 345 mustang skid with the 1.6 liter industrial Ford motor gas. The condensor is inside the distributor.
There is no marking what so ever on the distributor. The one guy I did talk to said that I needed a whole new distributor but then he offered me an ignitor part number. Do I just get that ignitor?
Any help would be great
|
Replies:
Posted By: steve(ill)
Date Posted: 21 Oct 2020 at 8:43am
nothing against the Petronix , but you should be able to but a point and condenser for the distributor, unless the bushings are just worn out and the shaft wobbles... Heck, its a FORD INDUSTRIAL motor... should be able to buy parts.. not just a skid steer.
-------------
Like them all, but love the "B"s.
|
Posted By: Ted J
Date Posted: 21 Oct 2020 at 1:47pm
Bob, call Steve Barbatto. He's the guru of them AND he sells them. If you've got a question, he's got the answer. Got to his web page, https://www.bb-customcircuits.com/" rel="nofollow - https://www.bb-customcircuits.com/
and click on 'More' and then the 'contact' on the drop down. He'll be glad you called. Tell him I sent you.
-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|