DMiller wrote:
Went to Baldwin Filters Google Search, went HERE
https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.f6e556a1cf41b967f2ae22c04256d1ca/?vgnextoid=7aa8a15580756610VgnVCM10000025651dacRCRD&vgnextfmt=EN
Then under applications
Filter | Baldwin Number | Qualifiers | | | | | Lube Ele. | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/PT115?application=Off-Highway%20Applications" rel="nofollow - PT115 | | | | | | Hyd. | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/PT8395?application=Off-Highway%20Applications" rel="nofollow - PT8395 | | | | | | Hyd. | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/P194-HD?application=Off-Highway%20Applications" rel="nofollow - P194-HD | | | | | | Clutch | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/B2?application=Off-Highway%20Applications" rel="nofollow - B2 | | | | | | P. Fuel Sock | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/F916-C?application=Off-Highway%20Applications" rel="nofollow - F916-C | | | | | | S. Fuel Ele. | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/PF906?application=Off-Highway%20Applications" rel="nofollow - PF906 | | | | | | Air | https://www.baldwinfilters.com/portal/site/Baldwin/menuitem.cbbae88e045ce676de8fe6de4256d1ca/?vgnextoid=35f91ef39676a610VgnVCM10000025651dacRCRD&vgnextfmt=EN#/partDetail/PA1684?application=Off-Highway%20Applications" rel="nofollow - PA1684 | | |
Took all of minute and half.
|
I sense you are exasperated. . Sorry - Read On..
This was EXACTLY what I did first AND why I decided to ask around. Something is either different in my HD6G or different/wrong in the Baldwin stuff.
If you check the two Hydraulic filters in the above list neither of them fit my Loaders 'Return' application. <Maybe the dimensions on Baldwin are incorrect? Dunno> PT 8395 - Baldwin Spec has it at 18 1/16" in length <well beyond my 8"-9.25" min/max measurements.> P194-HD - Spec shows this at 7 5/8" in length (Probably is for the air intake side?)<anyhow, Below my Return side minimum of 8" : at least in my machine>
Sorry - this was why I decided to ask around. Something is either different in my HD6G or different/wrong in the Baldwin stuff. It is readily apparent that my HD6G cannot accept a 18" filter.
Also - viewing the above discrepancy - buying any 'Kit' for the loader is also suspect (as they don't put the dims in there either, just pictures ). So I turned to this forum for help.
Went and measured my machines Max and Min this morning for the ID OD & Length.
Spent 3-4 HOURS on this again today: Taking min and max and searching for PN's that work with dimensions is pretty sketchy - though WIX has a pretty good front end...Wix is the ONLY supplier I could find that provide dimensions in a searchable method - rest of the world seems to depend on make and model (Which was already blown up pretty well by the above and the cross referencing from supposed original PN's that got me two filters that are too short, again dimensions not provided, just application). Wix - 75 pages of dimensions with flow numbers...and nothing that fits perfectly...but a few that might work in a pinch.
Eventually : I turned up a PT181 kit 'in stock' at AgCrazy <Mostly the kit is "unavailable"> and through several hours of subsequent searching landed a old scan of Baldwin Filters "Product Guide" that specified the Larger Element in thePT181 kit as OD 3 5/16; ID 1 1/8"; H 8 7/8". <=verified that THIS should fit.
Just a warning to anyone that would order straight off the above Baldwin list- IT MAY NOT FIT YOUR APPLICATION.
Thanks.
|