My first dozer! HD5 Looking for parts sources
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175213
Printed Date: 06 May 2024 at 12:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: My first dozer! HD5 Looking for parts sources
Posted By: mjpell
Subject: My first dozer! HD5 Looking for parts sources
Date Posted: 16 Oct 2020 at 4:36pm
|
I have my first piece of heavy equipment! a 1956 HD5. She ain't pretty, but she looks and sounds like she'll do the job. The old motor runs smooth as can be. Amazing to me really. Right off, I need a radiator cap and a gas cap. Probably more, but those are needed now. Can anyone point me to some sources for these? My Google-Fu skills are letting me down a bit. Thanks! Mike
 |
Replies:
Posted By: DMiller
Date Posted: 16 Oct 2020 at 6:06pm
| Any decent local parts house should carry a commercial sized(Semi Truck) Radiator cap, 4-7lb. Fuel cap is Pipe Thread but cannot remember the pipe size. Will need a loose fit and then vent drill the cap. Might try General Gear or Zimmerman Tractor first, Minnpar will have a p/n but do not count on a OE Style available. |
Posted By: gemdozer
Date Posted: 16 Oct 2020 at 6:54pm
| I have a fuel tank cap and check tomorrow for radiator cap |
Posted By: Coke-in-MN
Date Posted: 16 Oct 2020 at 7:46pm
|
It's a non pressure radiator - more old style gas cap type cap with internal wings to lock onto neck . A 2" pipe thread on tank , I had a Peterbuilt fuel tank cap on mine for years and it fit great . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |