Farm Equipment - Henderson Bucket

Print Page | Close Window

Henderson Bucket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174440
Printed Date: 06 Sep 2025 at 5:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Henderson Bucket

Posted By: CAPTMARCO
Subject: Henderson Bucket
Date Posted: 16 Sep 2020 at 9:54am

Gentlemen,

I saw a guy selling a henderson bucket setup that he had on his B, curious if I can use that same unit on my CA? Anyone know anything about this type system or if it's worth it on a narrow front? I know the pump goes on the PTO and it's relatively self contained but I know nothing else about that system.

Thanks!

Replies:

Posted By: PaulB
Date Posted: 16 Sep 2020 at 7:52pm

The framework is most likely a little different for mounting on a B than what it would need for a CA, however it probably could be modified to fit. A loader is the one thing I would never again have on a tricycle tractor. A tricycle will push around too much in the mud compared to a wide front. The CAs hydraulics would be more than adequate for the loader if the cylinders are made for the higher pressure.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Ricky D
Date Posted: 16 Sep 2020 at 8:28pm

Henderson cylinders take CA hydraulics, I blew the end out of one on a friend tractor when I was a teenager. After he warned me not to go to the top. That was a loader he took off his B w/charlyn pump, & put on the CA