Print Page | Close Window

200 Radiator

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174356
Printed Date: 20 Aug 2025 at 12:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 200 Radiator
Posted By: Red Bank
Subject: 200 Radiator
Date Posted: 13 Sep 2020 at 9:54am
Been watching a coolant leak that was getting worse. Checked it yesterday and the top seam on the front of the radiator at the top is leaking when I pressure tested it. I removed the radiator and will take it to the radiator shop in the morning but with the way the radiator is made should I start planning on just replacing it all together?



Replies:
Posted By: DSeries4
Date Posted: 13 Sep 2020 at 9:57am
If you take it to a rad shop, they will fix it.  Might need a recore, but that is the way I go.  It will be good for a heck of a long time.  Since you have the rad off, be sure to check the water pump for any slop in the shaft.  I would put new hoses on and replace the thermostat as well.


-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: Red Bank
Date Posted: 13 Sep 2020 at 4:06pm
Previous owner at some time replaced water pump and by pass hose but I will check water pump. I am going to replace radiator hoses by pass hose and thermostat while I am in there



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net