Dozer- could be saved
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173926
Printed Date: 23 Nov 2024 at 11:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Dozer- could be saved
Posted By: Acdiesel
Subject: Dozer- could be saved
Date Posted: 28 Aug 2020 at 8:54pm
|
not mine. link: https://www.facebook.com/marketplace/item/311383616735911/" rel="nofollow - https://www.facebook.com/marketplace/item/311383616735911/ ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Replies:
Posted By: JC-WI
Date Posted: 29 Aug 2020 at 12:53am
|
Lister says 22 tons and doesn't even give an HD desination... and wants 2750 dollars or he will scrap it. By the looks of location of air cleaners, it could be HD19, But probably more like an HD15... which weighs 28000 pounds 14 ton... blade, pump, hydraulics, maybe another 5000 pounds. or 33,000 pounds. or 16 1/2 tons... at 100 bucks a ton... $1700 bucks... Now if he would deliver it whole to my place, maybe he could see his price.  But if he thinks he is going to get his 2750 in scrap, he will be sadly mistaken after he wastes his time and gas cutting it up and hauling it in in pieces... Dozer does not look like an HD19, seems just to small for that. But if it is, it is 40,000 pounds + blade etc.  Here is an HD19  another 19  and another  HD15   ] 15 in action [TUBE]y3eJdFrWINc[/TUBE] ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: CAL(KS)
Date Posted: 29 Aug 2020 at 5:19am
|
Hd14 ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: DMiller
Date Posted: 29 Aug 2020 at 7:13am
|
‘Clean Scrap’ No bigger than 3’x3’ & 100 lbs is only bringing $60/t to $80/t currently here Most he can get IF cuts it up himself is $1600 And that after spends couple hundred in torch gas as well pays someone to dispose of drained liquids. Whole machines they will not even pay for but pickup For Free!! |
Posted By: Ray54
Date Posted: 29 Aug 2020 at 4:08pm
|
I always laugh at the adds that think their rust is gold plated the whole machine will bring them prepared scrape price. Back around 2000 cut up 2 Massey Harris combines for a landlord. Could not even get the local scrape yard to send a roll off bin. So still several ton I wast time looking over for a piece of iron,of course I never find anything close to what I want.
|
Posted By: DMiller
Date Posted: 29 Aug 2020 at 6:38pm
| Oh and NO 22 tons sitting there, that is Nowhere near to 44,000 lbs, only a 16B will go there. |
Posted By: JC-WI
Date Posted: 29 Aug 2020 at 6:47pm
|
HD14, twin intakes in front of operator under hood cowling.   1946 Allis Chalmers HD14 Crawler Here is A photo of my 1946 Allis Chalmers HD14. All original with 6-71
Detroit engine. 28000lbs Runs and drives well. (406) 486-5462
------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: DMiller
Date Posted: 29 Aug 2020 at 7:02pm
| Was figuring more like 30,000 lbs, 15 t where that will get him even LESS money. |
Posted By: acjwb
Date Posted: 29 Aug 2020 at 8:33pm
| He said it is a HD 15 |
Posted By: DMiller
Date Posted: 30 Aug 2020 at 6:45am
| Looking at back end S/N is at Top Right corner of finals housing, will start HDxx xxxxx |
Posted By: cy97w250@gmail.com
Date Posted: 02 Dec 2023 at 7:08pm
| Hey do you by chance still have the hd14? I’m searching for a nice on to add to my collection. |